Recessed Pendant Light Conversion Kit
Recessed Pendant Light Conversion Kit – Change recessed fixtures to pendant lights can give a new dimension to the room by providing a new focal point. Hanging lamps can also shift the light closer to a work space. Instead of pulling out your recessed lighting can from the ceiling and patch the plaster to cover a 6-inch or larger holes, use a recessed can converter to hang a pendant light. A conversion kit can also save the hassle of crawling on the wind to add support for a new fixture.
Instructions turn off power to the recessed pendant light conversion kit luminaries. Remove the light bulb and trim. Install recessed can converter bracket according to the manufacturer’s instructions. Screw the AC adapter into the recessed can light socket. Look inside the recessed luminaries for wing nut holding the flush-mounted socket can hold. Loosen wing nut with your fingers and press the bracket as high as possible inside the recessed can. Tighten the wing nut to hold the socket on the top of the jar. Remove the three screws sheet metal along the bottom edge of the recessed can.
Insert the recessed pendant light conversion kit can converter bracket into the recessed can and keep the converter in place with sheet metal screws. Secure the bracket with screws sheet if you had to install screws into the can. Screw the threaded pipes with the flush can converter assembly parts in the center of the recessed can converter. Feed the electrode cables from the AC adapter through the threaded pipe. Place the beveled medallion that came with the conversion kit or a ceiling medallion that can hide the flush can, the lip can and ceilings. Wood plate mounting plate included with the flush can converter mounting hardware to the threaded pipe. Fit your pendant lights according to the manufacturer’s instructions. Connect the black wire from the power adapter to the black cable from your pendant light by turning a cable connector on the wires. Connect the white wire from the power adapter to the white wire from the pendant light with a different cable connector. Slide the canopy of your pendant in threaded pipes and the medallion. Thread screw collar from pendant lights on the threaded pipe. Screw the collar holding the canopy and the medallion on the ceiling. Turn on the lamp pendant place.